MK Plastics DHK-NW IO&M - Manual (Page 12)

M.K. Plastics Corp. Montréal, Québec www.mkplastics.com Page. 12
Warranty
M.K. Plastics will not be responsible for damage to equipment or materials through improper installation, storage, improper
servicing, or through attempts to operate it in excess of its rated capacity or recommended use, intentional or otherwise. We will
not be responsible for consequential damage.
Based on the fact that M.K. Plastics has no direct control over the actual handling and use of its products in the field, M.K.
Plastics does not assume any liability for any loss to the customer or any personnel or any physical damages that are claimed
by anyone due to a failure or cause attributed to the use of its products. In no event shall M.K. Plastics be responsible for
consequential damages of any such defective material or workmanship, including but not limited to the buyer’s loss of material
or profit, increase expense of operation, downtime or reconstruction of the work and in no event shall M.K. Plastics obligation
under this warranty exceed the original contract price of the defective item.
M.K. Plastics warrants its equipment, products and parts, to be free from defects in workmanship and material under normal
use and service for one (1) year after delivery to the first user. Our obligation under this warranty being limited to repairing or
replacing, at our option, without cost at our factory any part, or parts which shall, within such warranty period, be returned to us
with transportation charges prepaid, and which our examination shall disclose to our satisfaction to have been defective.
M.K. Plastics will not be responsible for the cost of removal of a defective product or parts or the installation of a replaced product
or parts, or for costs due for its removal, crating or shipping.
On account of variables including but not limited to, vibration, system noise characteristics, motor overloading or change in
voltage condition, the specifics of customer application of equipment or other system conditions, M.K. Plastics does not expressly
warrant its equipment for any specific purpose.
The customer and its agents are responsible for the selection and application of M.K. Plastics products, including their fitness
for the purpose and performance intended. Consequently, the customer on behalf of its agents assumes all liability related to the
use/misuse, application and selection of the M.K. Plastics Products.
CORPORATION
SERVING THE NEEDS OF MODERN INDUSTRY
4955 de Courtrai Ave., Montréal, Québec, H3W 1A6 ● TEL: (514) 871-9999
Trimex Building, Route 11, Mooers, N.Y., 12958 ● TEL: (888) 278-9988
FAX: (514) 871-1753
Email: [email protected]
Bulletin 40-02-June 2013