2 voice mail functions, A. 16 hours recording time, B. 50 extension voice mail boxes – MOCET IG7600 Auto Attendant & Voicemail User Manual

Page 5: C. 50 virtual voice mail boxes, D. 200 vm messages per mailbox, E. email notification

Advertising
background image

IG7600 Auto Attendant & Voicemail

1.2 Voice Mail Functions

A. 16 Hours Recording Time

The Voice Mail Module provides up to 16 hours recording time that are
shared by all extensions. When 90% of the VM size is used, it shows
“Message Full” on the all IP20xx/M62/M22’s LCD.

When VM size is full, the call will be released when the caller asks to
leave the message

.

B. 50 Extension Voice Mail Boxes

IG7600 support 49 IP extensions and 1 SLT extension. Each extension
has a voice mail box. For IP extension, the voice mail box is formed
automatically when the extension number is added in Phone Extension
Table.

C. 50 Virtual Voice Mail Boxes

These Virtual Mailboxes can be used by the members not works in the
office, or as a secondary mailbox, or as a guest mailbox.

The virtual VM boxes also can be programmed as the Destination for
the specified DID Phone Number. The personal greeting can be used as
the appropriate Main Greeting to be played.

D. 200 VM Messages per Mailbox

For each VM box, the maximum number of Voice Mail is 200. The
maximum recording length for each message is 30 minutes. For each
leaving message, it can be saved 1 - 30 days or infinite.

When entering the VM box to hear the leaving messages, it will play the
total in the message folder first. If it plays “99”, it means it has 99 or
more messages in the folder.

When the mailbox has no room to store the new messages, VM will play
a warning message, and then release the call.

E. Email Notification

When a new message is left, VM supports to send a notification via
email. VM also supports to add the message as the attachment in WAV
format (for PCMU and PCMA format).

Envelop information indicates

 Time and date of the message received

 Sender information (Caller ID and Contact Number)

 Mailbox status (the count of the new and old messages)

 Email header can be programmed. The default is “You have a

new voice mail message in your mailbox!)

Copyright 2014 Tecom, Co. LTD. All rights reserved

Page 3 of 28

Advertising