MOCET M22 - Manual (Page 26)

M22 USER MANUAL
General Operations
Introduction
To operate the M22, you need to know some conventions that we will mention in this
manual. In the following descriptions, we will introduce some terminologies for your
understanding.
Calls
A “Call” in this guide represents how many simultaneous connections can be made to a
single phone number. M22 has only one line based on IG server, which can support up to
four calls simultaneously. This allows the user to place one caller on hold and talk to the
other person in another call on the same Line. Therefore, the M22 phone is said to support
multiple call appearances.
Register to IG7600
The M22 supports Plug-n-Play function to register and get configured automatically when it
is connected to IG7600’s LAN/WAN port (with same subnet as IG7600). It also supports
manual configuration if it is a remote phone (need to obtain the account information from
system administrator).
Refer to Configuration through Menus or Configuration through Web for detail information
of how to configure the phone to register to IG7600.
Caller ID & User ID
When you receive a call, the caller's phone number is shown on the screen, if the caller
hasn’t chosen to hide his number and if the network supports the Caller ID feature. The IP
Phone can display both the Caller ID (CLID) and the Caller Name (CNAM) of the caller if it
is available. Not all services and servers support CLID and CNAM. For more information
about this topic, please contact your service provider or system administrator.
Using Multiple Calls
Each line of service in the M22 can support up to four calls simultaneously. It allows you to
place one caller on hold and talk to the other person in another call on the same line.
26