MOCET M22 - Manual (Page 85)

IP2032 ADMINISTRATOR’S MANUAL
RTP Parameters:
RTP Port Base Set port base for RTP (Real-time Transport Protocol).
Enable Statistic Enable statistic RTP server.
Statistic Server Set statistic server.
Statistic Port Set statistic port.
Codec Settings:
G.711 u-law
G.711 a-law
G.722
G.723.1
G.726-32
G.729
iLBC
None
Select the codec priority for RTP communications.
Packet Time Select the relative packet time.
G.726-32 Payload Fill the number of G.726-32 payload.
NAT Settings:
SIP NAT Type Select SIP NAT type.
RTP NAT Type Select RTP NAT type.
SIP Keep Alive Turn on SIP keep alive.
SIP Keep Alive Time
(Sec.)
Set SIP keep alive time.
STUN Server Set STUN server IP address.
STUN Server Port Set STUN server port.
85