MOCET M62 - Manual (Page 11)

M62 USER MANUAL
1
Hanger
The hanger can be pulled; it is reversed for
wall-mount installation.
2
Speaker
For ring and hands-free talking.
3
Hook switch &
Handset
bottom cradle
Under the cradle, a hook switch is used for handset
hang-on and hang-off detection.
The handset bottom cradle is for the placement of
handset; placing the handset on the bottom cradle
while on a call will end the call.
4
Message LED
The message LED. Steady Blue means the phone is
booting or upgrading.
5
LCD Display
The LCD screen is used for displaying phone’s
settings, phone number, call status and so forth.
6
Soft keys
Soft keys displayed on the LCD are used for item
selection or control. The various soft key functions
depend on the current activity on the phone as they
are context-sensitive.
7
Line keys
Line keys can be used for indicating busy lamp field
(BLF) status of other phones, speed dial phone
numbers, or for activating features of a service or
IP-PBX. A blue LED is associated with each key to
indicate its status.
8
Programmable keys
Programmable keys can be used for indicating busy
lamp field (BLF) status of other phones, speed dial
phone numbers, or for activating features of a service
or IP-PBX. A blue LED is associated with each key to
indicate its status.
9
Numeric keypad
[1], [2], …, [9], [*], [0], [#]: The numeric keypad for
dialing numbers.
10
Volume Control key
The Volume Control key used to set the loudness of
the ringer, handset and speakerphone functions.
While the phone is in idle state, the Ringer is
adjustable, and it will play ring tone with current
volume level. While in a call, the Handset or Speaker
volume is adjustable.
11
Speaker Phone key
The SPKR key is used to activate or deactivate the
Hands-free feature. A blue LED is used to indicate
whether the speakerphone is active or not.
MUTE key
The MUTE key is used to activate or deactivate the
microphones on the M62. A blue LED is used to
indicate whether the phone is muted or not.
11