MOCET M62 - Manual (Page 68)

M62 USER MANUAL
 Static IP
5. Use the navigation key to choose Static IP
type and press OK key to validate.
 IP Address, Subnet
Mask, Default
Gateway, DNS
6. There are IP Address, Subnet Mask,
Default Gateway, and DNS items for user
to configure, press OK key to enter
particular entry.
7. Use the keypad to enter the IP address,
subnet mask, default gateway, or DNS of
your IP phone. Use the
＊
key for
representing a dot ‧. Press OK key to
validate the entered value. Press the Back
key to exit the menu.
Note: You could use the “BkSp” soft-key
to delete the last character.
You must reboot the phone to validate the network parameter
changing.
Dial Timeout
1. Press the Menu key on LCD.
 Admin Setting
2. Use the navigation key to select the Admin
Setting item. Press OK key to validate the
selection.
Type the administrator’s
password to get into Admin menu.
 Dial Timeout
3. Use the navigation key to select the Dial
Timeout item. Press OK key to validate the
selection.
4. Use the keypad to enter the Dial Timeout
and press OK key to validate the input.
You should enter a number from 0 to 9.
Press the Back key to exit the menu. The
default dial timeout setting is 6.
68