Attaching soundbar feet vertical horizontal, Power connection, Connecting to source – Paradigm Soundtrack 2 System User Manual

Page 2: Power on, then initiate audio

Advertising
background image

Choose subwoofer orientation

Setting up the soundbar

Wireless subwoofer pairing

1

1

2

OR

5

7

6

8

+

BASS

BASS

MODE

ATTENTION: From the moment you

press the soundbar’s ‘Sync’ button

you have 30 seconds to connect the

subwoofer to the wall outlet.

DO NOT connect subwoofer

to wall outlet until step 7.

When subwoofer is in horizontal

position feet must be attached

for heat dissipation.

ATTENTION: If the soundbar’s

LED flashes red and blue,

pairing has failed. Repeat

the Subwoofer Pairing process.

Wireless setting

Syncing

Adjust subwoofer loudness

Power connection

WARNING! THE SET-UP AND SYNCING STEPS MUST BE DONE IN THE FOLLOWING ORDER. DO NOT PLUG IN SUBWOOFER UNTIL STEP 7.

OPTIONAL: For wall mounting instructions, refer to Owners Manual.

Attaching soundbar feet

Vertical

Horizontal

Lay your soundbar face down on a soft

surface. Insert feet as shown, press firmly

until you hear a 'click'.

Connect subwoofer to wall outlet.

Press the Sync button to initiate pairing with

subwoofer. The LED on the soundbar should

flash blue ( ) for 30 seconds. Once a connection

is established the LED switches to solid blue ( ).

Your subwoofer’s LEVEL knob is set to 12 o’clock to

suit average preferences. If desired, adjust up or

down to match sound level of your speakers.

Move switch to ‘wireless’ setting

on subwoofer.

D

2

Power connection

Connect soundbar to wall outlet.

A

3

NOTE: Choose analog

OR digital connections

3.5-mm to mobile

audio device

(not included)

If desired, establish Bluetooth connection at this point (see rear for details)

Connecting to source

Analog connection to

TV (use for good audio)

Digital connection to TV

(use for best audio)

B

C

TV

C

B

4

Power on, then initiate audio

Using the Remote or Top Panel Controls, turn Power

ON. Then repeatedly press the Source button until

you hear audio from your device (TV, iPhone, etc).

#2 Phillips (not supplied)

Wireless

Sync

Source

Power

Volume

Down

Volume

Up

Top Panel Controls

Wireless Range

or 15 Meters

50’

EN_Soundtrack_2_Set-Up_Guide.indd 2

13-11-04 5:18 PM

Advertising