ParkZone PKZ6980 User Manual

Page 3

Advertising
background image

EN

To register your product online, visit www.parkzone.com

Transmitter and Receiver Binding ........................................................ 4
Battery Charging ................................................................................. 4
Battery Installation and ESC Arming .................................................... 5
Receiver Selection and Installation ...................................................... 5
Landing Gear Installation .................................................................... 6
Wing Installation ................................................................................. 6
Control Horn and Servo Arm Settings .................................................. 7
Horizontal Tail Installation ................................................................... 7
Clevis Installation

......................................................................................... 7

Transmitter Setup ............................................................................... 8
Dual Rates .......................................................................................... 8

Center of Gravity (CG) ......................................................................... 9
Control Direction Test .......................................................................... 9
AS3X Control Direction Test ............................................................... 10
Flying Tips. ....................................................................................... 11
Motor Service ................................................................................... 12
Troubleshooting Guide AS3X ............................................................. 12
Troubleshooting Guide ...................................................................... 13
Limited Warranty .............................................................................. 14
Warranty and Service Contact Information ........................................ 15
Compliance Information for the European Union ................................ 15
Replacement parts ............................................................................ 58
Optional parts ................................................................................... 59

Table of Contents

PNP

BNF

Installed

Motor

480 Brushless Outrunner Motor,960Kv (PKZ4416)

Installed

Installed

2 x Aileron Servos and 1 Elevator Servo (PKZ1081)

1 Rudder Servo (PKZ1090)

Installed

Installed

ESC

30-Amp Pro Switch-Mode BEC Brushless ESC (EFLA1030B)

Installed

Sold Separately

Recommended Receiver

Spektrum AR635 6-Channel Sport Receiver (SPMAR635)

Installed

Sold Separately

Recommended Battery

11.1V 3S 1800mAh 30C Li-Po (EFLB18003S30)

Included

Sold Separately

Recommended Battery Charger

2- to 3-Cell DC Li-Po Balancing Charger (PKZ1040)

Included

Sold Separately

Recommended Transmitter

Full-Range 4-Channel (or more) 2.4GHz with

Spektrum

DSM2

®

/DSMX

®

technology.

Sold Separately

Weight:
34.5 oz (978 g) with battery

1080.0mm (42.5 in)

40.0 inches (1017mm)

Quick Start Reference

Dual Rates

High

Low

100 %

70%

CG

76mm

3 inches back from the leading

edge of the wing at the root.

Flight Timer

Setting

First Flight

5 Min.

7 Min.

Prefl ight Checklist

1. Read this instruction manual thoroughly.
2. Remove and inspect the contents.
3. Charge the fl ight battery.
4. Fully assemble the model.
5. Install the fl ight battery in the aircraft (once it has been fully charged).
6. Bind the aircraft to your transmitter.
7. Make sure the linkages move freely.
8. Perform the Control Direction Test with the transmitter.
9. Perform the AS3X Control Direction Test with the aircraft.
10. Adjust the fl ight controls and transmitter.
11. Perform a radio system Range Check.
12. Find a safe and open area.
13. Plan fl ight for fl ying fi eld conditions.

Post Flight Checklist

1. Disconnect the fl ight battery from the ESC (Required for Safety

and battery life).

2. Power OFF the transmitter.
3. Remove the fl ight battery from the aircraft.
4. Recharge the fl ight battery.
5. Repair or replace all damaged parts.
6. Store the fl ight battery apart from the aircraft and monitor the

battery charge.

7. Make note of the fl ight conditions and fl ight plan results, planning for

future fl ight.

Box Contents

Specifi cations

3

Advertising
This manual is related to the following products: