Parr Instrument MTM - Manual (Page 2)

MTM Installation
P a r r I n s t r u m e n t C o m p a n y 2
Meter Installation in 4848 Reactor Controller (Continued)
Meter Installation Diagram
Side Panel Removal
The left side panel should be removed to get access
to the isolation board. This is the panel on the left
hand side of the controller when looking at it from
the front.
Panel to be Removed
This will require loosening the four nuts on the side
panel using a nut driver (two on the bottom and two
on the back), removing the top cross brace, and then
pulling the panel away from the chassis.
Bottom Nut on Side Panel