Peachtree Audio Decco - Manual (Page 5)

B a c k
P a n e l
Connections
5 1 1
AUX 1
TYPE: INTEGRATED AMP
MODEL: DECCO
POWER CONSUMPTION: 40W
DES IGN ED AN D E NGI NEE RED IN TH E U SA
MA DE IN CH INA
AUX 2
INPUT
AC INPUT
V OL TAG E S EL EC TO R
PRE OUT
R
R
L
L
L
R
+
+
-
-
USB BASS
EQ
OPT COAX
DIGITAL INPUTS
13 11 10 9 7
4
12
8
5
6
1 2 3
Voltage switching: For international use. Unplug the Decco before you make the switch and be sure to use the
proper fuse for the voltage chosen. **warning ** Improper voltage setting may cause damage to the Decco.
AC power cord attachment & Fuse: The three prong power cord is included in the Decco box. User replaceable
after turning the Decco off. You may call your dealer or Signal Path’s service department with any questions regarding
fuse replacement. **warning ** using the wrong value fuse may cause damage to the Decco.
Storage Bay: You can store a digital audio wireless device like the Sonos ZP80 or the Linksys Music Bridge in
this compartment. There may be concerns about reduced wireless range or heat buildup, though that has not
been our experience. If either happens, you should remove the device to see if you get better results.
Terminal Window: This opening will allow you to seal off a digital audio wireless device ( see #6 ) but still have ac-
cess to the terminals. If there are heat concerns then leave the entire Storage bay panel off.
Speaker terminals: The speaker terminals are clearly marked red-positive and black-negative for proper polarity
connections.
Coaxial Digital input: Coaxial digital connections are common on some CD players, cable boxes, Sonos modules,
the Slim Devices Squeezebox, and a host of other digital audio sources. Be sure to use a proper digital audio cable
for this purpose.
Optical Digital input: Toslink and fi ber optic cable connections are common on some CD players, cable boxes,
Apple products, and other digital audio sources.
USB Digital Input: The USB connection takes digital audio content off your computer and sends it to the internal
DAC via I2S confi guration.
USB lock: The LED next to the USB connection will remain lit when the signal from your computer is locked.
Bass Eq: +6db at 50hhz. Works very well to make very small speakers sound much larger. Do not activate if the
volume is already loud. Turn volume down, hit the switch, and slowly turn it up.
Aux1: Line level input that is suitable for iPods, CD players, Tuners, etc.
Aux2: Line level input that is suitable for iPods, CD players, Tuners, etc
Pre-Out: The preamp-out connections will allow you to use an external amp
with the Decco, and also provide connections for a subwoofer.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
3