Peachtree Audio Decco - Manual (Page 7)

VOLUME
+
-
7 6
5
4
3
2
1
9
8
The Decco remote control is straightforward, easy to use, and el-
egantly designed. You remove a screw on the back to replace dead
batteries. We suggest that after you manually turn the Decco “on”,
that standby be your default position when the Decco is not in use.
It will not damage the unit or wear the parts out more quickly than
being completely “off”.
On: This button will turn the Decco
“On” from the standby position.
Off/Standby: This botton will send
the Decco in to standby mode.
Volume + - : These buttons will
increase and decrease volume levels.
The motorized volume control has
an LED indicator for easy level
viewing from a distance.
USB: This button selects a digital
audio source at the USB connection.
Coax: This button selects a digital
audio source at the Coaxial digital
connection.
Opt: This button selects a digital
audio source at the Optical (or
Toslink) connection.
Mute: This button will mute the
Decco. When in mute, the Volume
control LED should blink. There is
no mute control on the front panel
of the Decco.
Aux 1: This button selects an
analog audio source like an iPod,
Tuner, or a CD player at the Aux1
connection.
Aux 2: This button selects an
analog audio source like an iPod,
Tuner, or a CD player at the Aux2
connection.
1)
2)
3)
4)
5)
6)
7)
8)
9)
5
R e m o t e
C o n t r o l