Peachtree Audio deepblue - Manual (Page 6)

LED Status:
͵
͵
͵
2.
manual to link to the player. Typically, Bluetooth controls are
3. Search the device name “Peachtree BT ” on your Bluetooth device
listed and select it as your audio speaker.
4.
is established.
5. Pairing remains intact even when the player or the Bluetooth ®
auto link with the last linked device when that device is in range.
Pairing your other Bluetooth ® device
Previously Paired Devices:
Bluetooth ® device, press and hold the [
[ PAIRING ]
the remote control for 2 seconds and repeat the above steps for
pairing your other Bluetooth
® .
Pl
Once the device is paired the blue light will turn off after 15
seconds
aying Bluetooth ® Music
1. Once your device and the player are linked you can start to play
Bluetooth ® music through the player.
2. Turn on the player and press the [
[ Bluetooth ® ]
control to select the Bluetooth ® mode, Blue light indicates for
Bluetooth ® mode.
3.
4. Press the [ ]
5. Press the [ ]
immediately to skip the previous track.
6. Press the [ ]
Press again to resume it.
7. Press the [ / ] [ / ]
adjust the system volume.
Note:
8 9
Note:
If the pairing is unsuccessful, re-pair your Bluetooth ® device with the
player and repeat the above steps.
Flashing quickly – No device paired
Flashing Slowly – Device pairing
Steady ON – Device paired 1. If you are using a smartphone as your source the audio playing will be
interrupted when there is an incoming call or when the user makes
a call.
finished.
Bluetooth ® -enable device.
NOTE: Depending on the Bluetooth ® device you are using, you may
on
need to manually go into media player mode on your device to control
®
®
®
®
®
®
®