Peachtree Audio deepblue - Manual (Page 7)

1. Connect a sound source with a Line or headphon e analogue output
to play through your player as below hookup diagram shown.
2. Press the [
or press the [ AUX ]
AUX mode. Green light indicates AUX Mode also.
3. Set your personal audio player / computer to PLAY.
Headphone socket
3.5 mm jack cable
(included)
• iPhone / iPad / iPod models
• MP3 players
• CD walkman players
• Tape walkman players
• Personal computers or laptops
Note:
at maximum volume output level. Therefore, if the unit randomly
stops playing the music or becomes distorted, move the volume level
to minimum and wait for a while. The user can try to move up the
PROBLEM SOLUTION
There is no power
to the player
Ensure that the Power Switch of wall socket is
Ensure that the AC plug is securely connected
to the player and proper wall outlet.
Trouble pairing
device / computer
with the player
your iPhone ® / iPad ® / iPod ® .
Make sure your device is working properly.
Check your device’s manual for details on
Bluetooth pairing and lin king.
Make sure your device supports the A2DP
linking / pairing. The pl ayer defaults to the
last linked device, so a new device may
need to be linked by press and hold the
[
pairing other device.
10 11
®
iPod ® , iPhone ® , and iPad ® are trademarks of Apple Inc., registered in the U.S. and other countries.