Peg-Perego Primo Viaggio 4-35 User Manual
Page 34
- 34 -
Installing the Car Seat without the Base
Important! The base is designed to avoid consumer misuse by reducing the number
of times the seat must be anchored to your vehicle. Please, use and install Primo
Viaggio 4.35 without the base only if needed.
Make sure that your vehicle is parked on
level ground when you install the base.
Position the restraint on the seat, so
that your baby is facing the rear of the
vehicle. Adjust the handle in the forward
most position as shown (a). Any other
position may injure your baby in an
accident. To move the handle, press the
gray buttons on the side of the handle
at the same time and rotate the handle.
Important! The seat must be parallel to
the ground. Use the line drawn on the
product as a reference: the line must be
horizontal. If necessary, use rolled towels
or pool noodles under the seat at vehicle
seat crease (b).