Physitemp Instruments BAT-10 - Manual (Page 2)

12.0 REPAIRS AND RECALIBRATION
12.1 In the event that a BAT-10 Thermometer is to be returned for repair and recalibration please
pack it with care and send it prepaid to:
Physitemp Instruments, Inc.
Service Department
154 Huron Avenue
Clifton, NJ 07013 USA
Please include with the instrument:
(1) A note describing any problems encountered.
(2) The name and telephone number of the user or other person we can contact.
(3) The complete return address for shipping.
12.2 A Service Manual for the BAT-10 is available at additional charge. It includes schematic,
component locator, trouble-shooting guide and complete calibration instructions. Specified test
equipment is required for recalibration or other servicing. Consult Physitemp for further service
information by telephone at:
973-779-5577 or fax 793-779-5954
12.3 Physitemp Instruments, Inc. warrants this instrument to be free from defects in material and
workmanship for 12 months from date of shipment. Repair or replacement will be made at no
charge at the discretion of Physitemp if the defect is not the result of misuse or abuse. Physitemp
accepts no consequential liabilty for delay in delivery, alleged faulty performance of the product, or
for any other cause.
Cables and probes are considered expendable and are not covered by this warranty. See separate
warranty enclosed with probe.
For your protection, please pack returned items carefully, and insure them against possible damage
or loss in transit. Physitemp will not be responsible for damage resulting from careless or inade-
quate packaging. Please return freight prepaid.
During the warranty period, the instrument may also be returned for a free calibration check.
11