Physitemp Instruments BAT-10 - Manual (Page 6)

10.0 SPECIFICATIONS
Temperature Range -200°C to +400°C, 1°C resolution
and Resolution: -100°C to +199.9°C, 0.1°C resolution
Differential -19.99°C to +19.99°C. Linearization centered at 40°C
Temperature Range: See Section 5.0
Accuracy: 1° Range 1°C, (±1 digit)
0.1° Range 0.1°C, (±1 digit)
Diff. Range 0.01°C (±1 digit)
Repeatability: One least significant digit
Calibration: Conforms to National Institute of Standards and Technology
(Monograph 125)
Sensors: Any Physitemp type T Thermocouple
Ambient Operating Range: 15 - 45°C
Readout: 3 1/2 digits
Batteries: BAT-10 - 4 alkaline “C” cells (Battery life, 1000 hours)
BAT-10R - (rechargeable unit) - 4 NI-Cads
Special Display LO-BAT appears on display when battery voltage is low, but
Indications: several hours of life remain.
INPUT appears on display when open probe or input
fault condition has occured.
ALARM, acitivated by user supplied external 5V logic level
Analog output: Non-linearized set at 1.5V corresponding to temperature of 401°C
Linearized (when supplied) 1mV/count
7