Pitney Bowes DI380 OfficeRight Systems - Manual (Page 41)

OMR • 3
3-1 SV61789 Rev.A
OMR Availability
Your machine may be equipped with Optical Mark Recognition
(OMR) scanning, depending on the model you purchased. All mod-
els have 20 Operator programmable jobs plus 1 default job that your
Pitney Bowes Service Representative normally sets.
What is OMR?
An OMR mark is normally a dark solid line on a sheet of light colored
paper that is perpendicular to the direc-
tion of paper travel. This line must be
sufficiently thick and dense to trigger the
OMR scanner on the system.
The OMR scanner, working with the
OMR system software, checks for one
or more different OMR marks on a docu-
ment while it is fed through the system.
The tracking of these OMR marks by the
system increases the chance that a set
of sheets which belong together (a set)
actually stays together throughout the
inserting process.
Use the
Prev (◄) and Next (►) buttons to step forward or back-
ward through the settings available. Once the item displays, use the
Change (+/-) buttons to select the option you want.
A Brief Overview of OMR on Your Machine
One sheet feeder holds sheets with OMR marks:
• Sheet feeder 1 for C-fold and double fold
• Sheet feeder 2 for Z-fold and single fold
The sheet feeder holding sheets with OMR marks can feed multiple
sheets per envelope.
The sheet feeder not holding OMR sheets can hold supplementary
sheets that you can place under the selective control of the OMR
sheets.
Typical
OMR marks