Pitney Bowes DI380 OfficeRight Systems - Manual (Page 61)

Reference • 4
4-1 SV61789 Rev. A
Changing the Display Language
To change the language of the display…
1. Open the hinged cover to the right of the display. This reveals the
setup buttons. Press Setup. The indicator lights and the machine
asks for an access code.
2. Use the Change (+/-) buttons to select the access code 99.
3. Press Next (►) to select the languages option.
4. Use the Change (+/-) buttons to scroll through the languages.
When your required language is displayed, press the Setup but-
ton to select the language and leave the setup mode.
Clearing Material
Note: All the following illustrations show the three-station machine;
other models are similar.
The machine is designed to assure maximum performance. In the
event of a material stoppage, the display flashes a symbol indicating
where the stoppage has occurred. First press Clear Deck to attempt
to feed the material through the machine. If not successful, the sec-
tions below tell you how to remove the trays and fold plates to gain
access to the material.
The Manual Advance Knob
Having located the material, you
may need to use the Manual
Advance Knob to manually feed
paper out of the grip of feed roll-
ers.
The Manual Advance Knob is lo-
cated behind the drop down cov-
er at the left front of the machine
as shown in the figure, right.