Inserting micro sd card, Mobile networks connection, Goback – PocketBook SURFpad 3 (7,85") User Manual

Page 16

Advertising
background image

GETTING STARTED

16

INSERTING MICRO SD CARD

The Device already has 16 GB of internal storage, but you can extend it up
to 2 TB by using micro SD card.

Insert it to the slot, like it
shown on a figure, and
slightly push until card will be
fixed.

To eject the card, slightly press
on its edge until it will be un-
fixed, and pull it to get.

ATTENTION!

Before ejecting microSD card either turn the Device off or unmount it:

go to

Settings > Storage settings > Unmount SD card

. Otherwise the data stored on

microSD card might be damaged.

Sim slot

SD card slot

MOBILE NETWORKS CONNECTION

ATTENTION!

The Device utilizes some services, which don’t ask user’s permission for

Internet access (for example, synchronization). Consult with your mobile operator about
traffic rates.

The Device supports GSM and/or WCDMA mobile networks connection for
Internet access.

ATTENTION!

Before inserting or ejecting SIM-card turn the Device off.

Install your network operator SIM-card, as it is shown on the figure, and turn
the Device on. In case if the card is protected with PIN-code, the Device will
ask you to enter it from on-screen keyboard. PIN-code request settings can
be changed in

Settings > Security > SIM card lock > Set up SIM card lock

.

Advertising