POP ART toaster The Stupid Toaster/4 Stencils User Manual
Page 4
For optimum toasted image, we recommend using setting 3-4. Please note:
though image can be toasted on all types of bread, the degree of branding
will vary depending upon the type and size of bread used.
Though not imperative, we suggest removing the image plates when toasting
bagels, waffles, pop tarts (please do not used iced pop tarts in toaster), etc. for
better toasting on back side of food product.
If you wish to stop the toasting process, press the Cancel button (D). This will
automatically eject the toast, and cancel the heating elements.
If the bread sticks in the toaster, unplug it, wait for it to cool, then remove the
bread. NEVER USE METAL UTENSILS TO REMOVE THE BREAD.
After use, slide open crumb tray and wipe away crumbs using a dry cloth.
Always allow at least 1 minute’s cooling time between cycles if toaster is
being used more than once at a time.
To remove or replace metal plates with an alternate image plate, please use the
provided hook by latching onto handle and pulling gently upward through the
guides. Please note: image plate should not be touched with bare hands
until toaster has cooled down completely. Use the enclosed hook or your
oven mit.
If the lead connecting the toaster to the power supply is damaged, it should
only be replaced by a qualified service engineer or the toaster manufacturer.
CLEANING AND CARE INSTRUCTIONS – NOTE THE TOASTER
SHOULD BE ALLOWED TO COOL COMPLETELY BEFORE
CLEANING.
Do not immerse in water.
Unplug from the power outlet (mains).
DO NOT use coarse or abrasive sponges/cloths or steel wool to clean the
toaster.
Never spray or apply cleaner directly onto or into the toaster – cleaner should
be applied to a soft cloth.
The outside of the toaster should be wiped with a soft, damp cloth, and
polished with a soft, dry cloth.
After cleaning, wait a few minutes for the toaster to dry completely before use.
Any other servicing should be performed by an authorized service
representative.