Rocktron Velocity VT60 - Manual (Page 7)

4
Rear Panel
The LOOP SEND jack provides an output from the VT60 effects
loop to be fed to the input of an effects device (or the input of the
first effects device in a chain of such devices).
The LOOP RETURN provides an input to the VT60 effects loop
which accepts the output of an effects device (or the output of the
last effects device in a chain of such devices).
This jack accepts a stereo (RTS) ¼" cable from a dual function
footswitch, which can then be used to control the current channel
and loop on/off status by remote means.
The VOLUME PEDAL jack accepts the ¼" stereo (RTS) output
from a volume pedal.
The Power Inlet module accepts the detachable power cord in-
cluded with the unit, and also houses the main fuse for the unit.
(Always replace with slow blow fuse indicated on panel.)
1 LOOP SEND jack
2 LOOP RETURN jack
3 FOOTSWITCH
(STEREO CABLE) jack
4 VOLUME PEDAL
(STEREO CABLE) jack
5 Power Inlet module