Rocktron UTOPIA G300 - Manual (Page 73)

73
Step 1 To access the FOOT SW MAPPING function, turn the FUNCTION SELECT knob clockwise
to "FOOT SW MAPPING".
3,5 6 2,4 1
Step 2 Turn the PARAMETER SELECT knob to select EFX 1.
The "FOOT SW MAPPING" function allows you to select what effect will be used in the 2ND
FUNCTION MODE when accessing the EFFECT ON/OFF (Second Function button number 7) and
what CHANNEL you will "toggle" to when accessing the CHANNEL TOGGLE (2nd Function button
number 6).
When using EFX 1 option you can map the footswitch to one of the following:
COMPRESSO (Compressor) - Turns the COMPRESSOR On and OFF within the preset
SOLO - Gives the output a 4dB boost within the preset.
TBYPASS - (Tru-Bypass) - this bypasses all electronic processing of the G300.
8. Foot SW Mapping (Footswitch Mapping)
f o o t s w m a p p i n g
e f x 1 C o m p r e s s o
F o o t s w m a p p i n g
e f x 1 t b y p a s s
Step 3 Use the PARAMETER ADJUST knob to select Compressor, Solo or TBypass (Tru-Bypass).
f o o t s w m a p p i n g
e f x s o l o