ROHO SelectProtec safety enhancement system - Manual (Page 8)

7
Section 5 Setup & Removal Instructions
Locate the SelectAir mattress hose
fitting and feed it through the access
hole in the bottom of the cover.
Press the mattress hose fitting into the
fitting on the air supply hose.
Place the top section of the
SelectProtect cover over the mattress.
At the foot of the mattress, lift one side
of the cover’s top section until the foot
bolster pocket’s zipper is visible. The
pocket zipper in on the underside of the
cover top.
Unzip the pocket.
Insert a foot bolster so the tapered end
will be facing down and away from the
bed.
Zip the pocket shut.
Repeat steps 8- for the second foot
bolster.
Zip the cover shut unil you reach a
shoulder bolster pocket.
5.
6.
7.
8.
9.
0.
.
2.
3.
Steps 5-6
Steps 8-9
Step 0
Step 3