Ruark Audio R1 (mk2) - Manual (Page 11)

11
Backlight
The backlight automatically adjusts
to suit ambient light but you can also
set it to ‘time-out’ and switch off. We
recommend this setting is activated
when R1 is used with its optional
battery pack (BackPack) to give best
battery life.
1. In ‘System’ menu, use ▼▲ to
select ‘Backlight’. Press OK to
confirm.
2. Use ▼▲ to cycle through options.
Press OK to confirm.
Factory reset
Reset to default factory settings.
1. In ‘System’ menu, use ▼▲ to
select ‘Factory reset’. Press
OK to
confirm.
2. Use ▼▲ to select ‘Yes’ or ‘No’.
Press
OK to confirm.
Software version
Use this function to view the
Model Software version.
In ‘System’ menu, use ▼▲ to select
‘Software version’. Press OK to
confirm.
Software upgrade
This facility is for factory and dealer
use only. Its primary function is to
allow customisation for applications
such as Hotel use etc.
1. In ‘System’ menu, use ▼▲ to
select ‘Software upgrade’.
Press
OK
to confirm.
2. Use ▼▲ to select ‘Yes’ or ‘No’.
Press
OK to confirm.
System settings
To change system settings press and hold INFO/MENU.
Use ▼▲ to select ‘System’ and press OK to confirm.
Did you know you can press INFO/MENU
at any time to return to previous step?
EN