Ruark Audio R1 (mk2) - Manual (Page 7)

7
Advanced DAB settings
These settings are only available when source is set to DAB.
Full scan
Updates the list of available DAB
stations.
1. Press and hold INFO/MENU
until ‘Full scan’ appears. Press OK
to confirm.
2. The R1 will commence a scan
of all available DAB stations.
Manual tune
Manually change the frequency.
1. Press and hold INFO/MENU.
Press ▼▲ to select ‘Manual tune’.
Press
OK to confirm.
2. Use ▼▲ to change the
frequency. Press
OK to confirm.
DRC
(Dynamic Range Control)
Some Talk and Classical music
stations transmit a DRC signal which
can make quiet passages easier to
hear in noisy environments. If DRC is
not transmitted, this function will have
no effect.
1. Press and hold INFO/MENU.
Press ▼▲ to select ‘DRC’.
Press OK to confirm.
2. Use ▼▲ to cycle through ‘DRC
high’, ‘DRC low’ and ‘DRC off’.
Press OK to confirm.
Prune
Removes unused or unavailable
stations from list.
1. Press and hold INFO/MENU.
Press ▼▲ to select ‘Prune’.
Press
OK to confirm.
2. Use ▼▲ to select ‘Yes’ or ‘No’.
Press
OK
to confirm.
Did you know you can press INFO/MENU
at any time to return to previous step?
EN