Rupert Neve Shelford 5051 Inductor EQ / Compressor - Manual (Page 14)

14
@ 20kHz, +20 dBu out Better than 0.010%
Equalizer
Noise:
Measured at Main Output, unweighted, 22Hz-22kHz,
Terminated 40 Ohms. with all gains set at 0,
Better than –92 dBu
Maximum input:
from 20 Hz to 20 kH,
+24.5 dBu
Maximum output:
from 20 Hz to 20 kHz,
+24.5 dBu
Total Harmonic Distortion and Noise:
from <10 Hz to 80 kHz,
@ 1kHz, +20 dBu output: Better than 0.007%
@ 20Hz, +20 dBu out Better than 0.120%
@ 20kHz, +20 dBu out Better than 0.070%
The Compressor
(Threshold at +20 dB, Ratio at 1.1:1, Gain at 0)
Noise:
Measured at Main Output, unweighted, 22Hz-22kHz,
Terminated 40 Ohms.
Better than –92 dBu
Maximum input:
from 20 Hz to 20 kHz,
+25 dBu.
Maximum output:
from 20 Hz to 20 kHz,
+25 dBu.
Total Harmonic Distortion and Noise:
from <10 Hz to 80 kHz
@ 1kHz, +20 dBu output: Better than 0.020%
@ 20Hz, +20 dBu output Better than 0.140%
@ 20kHz, +20 dBu output Better than 0.070%
Threshold:
Continuously Variable from -30dBu to +20dBu
Ratio:
Continuously Variable from 1.1:1 to 40:1
Gain:
Continuously Variable from -6 dB to +20 dB
Attack:
Continuously Variable from 20 mS to 75 mS
Release:
Continuously Variable from 100mS to 2.5 Seconds