Simaudio Neo 400M Amplifier - Manual (Page 11)

400M Power Amplifier
____________________________________________________________________________________
11
Remote Operation
Figure 3: Remote Operation
In figure 3 we have a Nēo 350P Preamplifier and a
pair of 400M Amplifiers connected together via their
respective 12V triggers; The 12V trigger output on
the 350P is connected to the 12V trigger input on
the top 400M (using a 1/8” mini-jack cable). The
12V trigger output from this 400M connects to the
12V trigger input on the bottom 400M (also using a
1/8” mini-jack cable). When you turn on the 350P
using a remote control (or its Standby button), both
400M’s will turn on automatically. The same rule
applies when you put the 350P into Standby mode.