Simaudio Neo 400M Amplifier - Manual (Page 7)

400M Power Amplifier
____________________________________________________________________________________
7
Unpacking
The Nēo 400M Power Amplifier should be removed from its box with care.
The following accessories should be included inside the box with your amplifier:
9 AC power cable
9 This owner’s manual
9 Warranty and product registration information (USA and Canada only)
Once the Nēo 400M is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We
suggest that you keep all of the original packaging, storing it in a safe, dry place in case you’re required to
transport this product. The customized packaging is specially designed to protect the 400M from any potential
damage during transit.
Please write the serial number of your new Nēo 400M in the space provided below for future reference.
Serial No.: ________________
Installation & Placement
The Nēo 400M Mono Power Amplifier requires
reasonable ventilation to maintain an optimum and
consistent operating temperature, especially since it
will radiate heat when driven hard. Consequently, it
should be placed in a location with empty space
around it for proper heat dissipation. You should
never place another component on top of this
integrated amplifier. As well, it should be placed on
a solid level surface. You should avoid placing it near
a heat source or inside a closed cabinet that is not
well ventilated as this could compromise the
amplifier’s performance and reliability. The 400M
uses a large toroidal transformer in its power supply;
even though it is well shielded, you should not place
this power amplifier too close to source components
sensitive to EMI, such as turntables, phono
preamplifiers and CD Players. Finally, y ou should
never place another component directly on top of
this power amplifier.