Specifications – Simaudio Neo 260D CD Transport / DAC User Manual
Page 14
260
D CD Transport w/ Optional DAC
____________________________________________________________________________________
14
Specifications
Configuration ................................................ Single-Ended
Digital / Analog Power Supply Transformers ..... 25VA
Power Supply Capacitance ............................. 19,800µF
Digital Outputs (2) ........................................ S/PDIF (RCA), AES/EBU (XLR)
Remote Control ............................................. Full-Function CRM-2
Power Consumption in Standby ....................... 0.5 watts
AC Power Requirements ................................. 120V / 60Hz or 240V / 50Hz
Shipping Weight ............................................ 16 lbs / 7.5 Kgs
Dimensions (W x H x D) .................................. 16.9 x 3.4 x 13.1 in. / 42.9 x 8.6 x 33.3 cm.
Optional
32-bit Digital-to-Analog Converter:
Digital Filter / Digital-to-Analog Converter ......... 32-bit
Frequency Response (full range) ..................... 2Hz - 100kHz +0/-3dB
THD @1kHz, 0dBFS (A-weighted) ..................... < 0.005%
Intermodulation Distortion ............................. < 0.005%
Dynamic Range ............................................. > 120dB
Signal-to-noise Ratio ..................................... > 120dB @ full output
Channel Separation ....................................... > 116dB
Low Level Linearity ........................................ < ±0.25dB at -90dBFS
Intrinsic Jitter ............................................... 1 picosecond RMS
Analog Outputs – Balanced ............................ 1 pair XLR
Analog Outputs – Single Ended ....................... 1 pair RCA
Analog Output Impedance - XLR / RCA ......... 75
Ω
Max. Analog Output @ 0dBFS - XLR / RCA ...... 2.0 Volts
Bit-depth range / Sampling Frequency .............. 16 to 24 bits / 44.1kHz to 192kHz
Digital Inputs (4)............................................ 2x S/PDIF (RCA), 1x TosLink (Optical), 1x USB
Balanced Pin Assignment:
Pin 1........................... Ground
Pin
2...........................
Positive
Pin
3
.......................... Negative
NOTE: If you require the RS-232 codes for your Nēo 260D, please visit the "Contact Us" page
and complete the "Information request" form on our websit.
Fuse Replacement:
F1 : 0.5A slow blow (5 x 20mm size).
F2 : 120V version use a 0.2A slow blow (5 x 20mm size).
230V version use a 0.1A slow blow (5 x 20mm size).