Simaudio Neo 260D CD Transport / DAC - Manual (Page 7)

260 D CD Transport w/ Optional DAC
____________________________________________________________________________________
7
Unpacking
The Nēo 260D CD Transport should be removed from its box with care.
The following accessories should be included inside the box with your CD Transport:
9 AC power cable
9 ‘CRM-2’ remote control with two ‘AA’ batteries
9 ‘SimLink’ cable with 1/8” mini plug terminations on each end
9 This owner’s manual
9 Warranty and product registration information (USA and Canada only)
Once the Nēo 260D is unpacked, inspect it
thoroughly and report any damage to your dealer
immediately. We suggest that you keep all of the
original packaging, storing it in a safe, dry place in
case you’re required to transport this product. The
customized packaging is specially designed to
protect the 260D from any potential damage during
transit.
Please write the serial number of your new Nēo 260D in the space provided below for future reference.
Serial No.: ________________
Installation & Placement
The Nēo 260D requires only minimal ventilation to
maintain an optimum and consistent operating
temperature. However, you should avoid placing it
near a heat source as this could compromise the CD
Transport’s performance and reliability. As well, it
should be placed on a solid level surface. The 260D
uses a toroidal transformer; even though it is well
shielded, you should not place the CD Transport too
close to source components sensitive to EMI, such
as a turntables.
Compact discs are easily damaged, and must be
kept very clean. Always store them in their cases.
Dirty or finger-marked discs will reproduce music
poorly. Moreover, the transport may even mute
parts of a track, or be unable to find some tracks. If
you need to clean a CD remember to use a soft lint-
free cloth, using a radial action (i.e. starting from
the center and aiming towards the edges). Do not
attempt to clean a compact disc using a rotating
motion.
If you intend to use the Nēo 340i’s USB input
connection with a Windows-based computer,
you will need to install our USB HD driver,
which can be downloaded from the support
section of our website.
Note: Apple-based computers don’t require
this driver.