Sonnox Oxford Reverb - Manual (Page 21)

7.2 Reverb
Tail 7 DESCRIPTION OF CONTROLS
Tail
Input
This provides a crossfade between a delay compensated versions of the input signal
provided by the DELAY COMP control and the mixed signal resulting from the ER
MIX stage.
Note:
A combination of the input signal and delayed signal together can cause unwanted
frequency combing effects when the ER SIZE is set for smaller spaces. It is therefore
best to arrange the ER MIX and TAIL INPUT controls to predominately use either a mix
of the Early Reflections and the input, or the Early Reflections and the delayed input
when simulating smaller spaces.
Note:
TIP: To aid your understanding of the above descriptions, refer to the block diagram at
the start of Section 2.
www.sonnox.com 21 Go
to
contents