Sonnox Oxford Reverb - Manual (Page 27)

7.5 Options
Menu 7 DESCRIPTION OF CONTROLS
entry in the Options menu (see next page).
Note:
The LOCK button works by preventing the wet/dry parameters from being
loaded into the DSP, and applies only to preset loads initiated by the onboard
Preset Manager (ie. Load, A/B, + and –). Parameter automation, or preset loads
initiated by the host will override the LOCK button; this means that project loads
will sound the same as when you left them.
Output
meters
These display the peak output level from the reverb plug-in.
7.5 Options
Menu
Clicking the Sonnox button produces a drop-down options menu.
Clip
Lights
These options determine the approximate time that an overload indicator will stay on
for when the plug-in has detected a full-level sample at either its input or output.
Enable
Sonnox
Toolbar
Displays or hides the Sonnox Preset Manager Toolbar (see Section 4).
Show
Preset
Name
Path
Shows the hierarchical folder path for Presets that are stored in sub-folders of the
default Preset folder.
Exclude
Wet/Dry
from
Preset
Loads
This replicates the function of the LOCK button (see previous page), and determines
its default setting. When LOCK is active, the setting of the WET/DRY control will not
be altered when Presets are loaded; subsequently deselecting the LOCK button will
deactivate this option. If you mostly use the reverb in an aux send, you will probably
want the default setting of this function to be ‘locked’; if you use the reverb in a
channel, the preferred setting is likely to be ‘unlocked’.
www.sonnox.com 27 Go
to
contents