Sonnox Oxford SuprEsser - Manual (Page 17)

3.3 Advanced
Operation 3 OPERATION
Auto Level Tracking therefore works well with continuous material, or with conversation
broken up with frequent pauses.
Setting
the
After-Silence
Start
Level
If the above algorithm is tending to under-correct when the vocalist starts singing after a
pause, you can, if you wish, set the ‘After-Silence Start Level’ by moving the threshold
fader while the plug-in is receiving silence or is non-active.
If you move the threshold level while there is silence or no signal, this will tell the plug-in
what level to assume when the signal comes back after going away for a while. This level
will remain indicated on the graph as a ghost line.
www.sonnox.com 17 Go
to
contents