Sonnox Oxford SuprEsser User Manual
Page 8
3.1 Signal Processing Overview
3 OPERATION
Advanced Mode Signal Flow
In addition to the four EQ types, there are four different compressor modes that are
concerned with which signal is passed to the sidechain and which signal is passed to the
main input of the compressor. See Section 2.3 Advanced Operational Modes for more
information on this.
The following diagram provides a more complete signal flow to illustrate the elements
required for advanced modes of operation:
Advanced SuprEsser signal flow
The ‘Wet/Dry’ control is a frequently requested feature that allows you to add back the
uncompressed signal to a highly compressed signal to add in some punch. As you can
see from the diagram above, the Wet/Dry blend control is implemented inside the
dynamics module, and therefore only operates as expected when you are listening to the
‘Mix’, or ‘Inside’.