Speck Electronics ASC - Manual (Page 6)

2
Thank you for purchasing our Model ASC Equalizer. The Model ASC
has operational features that are easy to understand and you should be
up and running in no time. If you are unfamiliar with audio equipment
or audio signal flow, it is recommended that you read this manual. If
you have any questions regarding the Model ASC or any Speck product,
do not hesitate to contact Speck Electronics. Our phone number is
+760-723-4281.
The Model ASC is a four band parametric equalizer that is housed in a
1/2 rack space chassis. It is well suited in audio applications from
professional recording, sound contracting, touring, or any application
where equalization is required.
The Model ASC is available in four models:
One of the unique features of the Model ASC is that it integrates two
types of filter circuit design. The Low and High bands use a simulated
inductor (SI) circuit design, and the Low/Mid and Mid bands are of a
state-variable filter design.
The Model ASC is divided into 4 bands that cover a total frequency
range of 20Hz to 25kHz:
L - The Low frequency band (Simulated inductor)
L/M - a selectable Low or Mid frequency band (State variable filter)
M - the Mid frequency band (State variable filter)
H - the High frequency band (Simulated inductor)
The Model ASC with its balanced input and output will accept a wide
variety of signal levels and has been designed with a generous amount
of headroom.
The Model ASC is shipped with an external 16 VAC, 1.1 amp power
Introduction
General
Chapter 1 Introduction Section
The standard Model ASC
(North American Power supply)
The standard Model ASC
(European Power supply)
The Model ASC with output transformer option
(North American Power supply)
The Model ASC with output transformer option
(European Power supply)
ASC-NA
ASC-EU
ASC-T-NA
ASC-T-EU