Effects send and return connections – Speck Electronics SSM User Manual
Page 46
Chapter 4 Operation Section
Each of the eight effect send channels has a separate unbalanced 1/4"
T.S. jack to interface to the input of an effects device.
It is completely acceptable, from an electronic standpoint, to adapt this
connector to the input of any effects device, regardless of the type of
input connector utilized on the effects unit (phone, RCA, XL, barrier
strip, etc.).
Each effects return provides two discrete unbalanced 1/4" T.S. jacks for
connection from the outputs of a left/right stereo effects device. In order
to operate the stereo effects return as a mono return, it is necessary to
connect the mono output of the effect to both the left and right return
jacks.
Effects Send and
Return Connections
41
3. Effects Send Jack
4. Effects Return Input Jacks
Refer to Figure 8 for location of items 3 and 4.