SpectraCal CalMAN RGB - Manual (Page 11)

11
6. Follow the instructions within the workflow for connecting to CalMAN Client 3 and the SpectraCal C3
Colorimeter, ensuring that the C3 colorimeter is placed in the center of the target monitor.
7. Continue using the instructions provided with the workflow to complete the calibration.
2.4 Calibrating a secondary monitor on a local computer (alternative for Windows only).
If conducting an Advanced Calibration on a Windows computer, you may use these alternative setups.
OR
1. Connect the light meter (SpectraCal C3 Colorimeter) to the USB port on the host computer.
2. Open CalMAN RGB.
3. If using the pattern window within CalMAN RGB, drag the CalMAN RGB window to the monitor you
wish to calibrate. If using the CalMAN Client 3 pop-up pattern window, leave the CalMAN RGB
window on the monitor you are not calibrating.
4. Select Advanced Calibration from CalMAN RGB’s welcome screen.