SpectraCal CalMAN RGB - Manual (Page 12)

12
5. From the opening screen of the Advanced Calibration workflow, select “This Computer,” “Windows,”
and “Multiple” from the drop-downs in the bottom right-hand corner of the screen. When finished,
click Next.
6. Follow the instructions within the workflow for connecting to CalMAN Client 3 and the SpectraCal C3
Colorimeter, ensuring that the C3 colorimeter is placed in the center of the target monitor.
7. Continue using the instructions provided within the workflow to complete the calibration.
2.5 Calibrating a remote computer.
Use this setup to calibrate a remote computer on a shared local network.
1. Connect the light meter (SpectraCal C3 Colorimeter) to the USB port on the host computer.
2. Open CalMAN RGB on the host computer.
3. Select Advanced Calibration from CalMAN RGB’s welcome screen.
4. From the opening screen of the Advanced Calibration workflow, select “Networked Computer,”
“Mac” or “Windows,” and “Single” from the drop-downs in the bottom right-hand corner of the
screen. When finished, click Next.
5. Follow the instructions within the workflow for connecting to CalMAN Client 3 and the SpectraCal C3
Colorimeter, ensuring that the C3 colorimeter is centered over the target computer.
6. Continue using the instructions provided within the workflow to complete the calibration.
Running an Advanced Monitor Calibration
The following is provided to walk you through the pages contained within the Advanced Monitor Calibration
workflow. Similar instructions as these are provided within the workflow itself.
Pre-Calibration Capture
Click Read Series (shown at left) to measure your monitor’s performance before calibration. The