SpectraCal ColorBox - Manual (Page 3)

3528 Bagley Ave. N. Seattle, WA 98103 | 2329 N. Career Ave, Suite 209 Sioux Falls, SD 57107
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
9. Under File Path, select the desired directory path and provide a name for the LUT file that
CalMAN will create (e.g. monitor ID and date).
10. Under Calibration Type, select the desired type of 3D LUT calibration process.

IR Profile (time based): Creates the best quality display calibration 3D LUT possible
in the selected period of time. You select how much display quality you have time
for, from 30 minutes to maximum display quality (6,000 points max). Uses
Intelligent Resolution Profiling to search out the most nonlinear color space areas
and correct those first.

IR Profile (point based): Creates the best quality display calibration 3D LUT possible
with the selected number of measurement points (1,000 - 10,000 points). Uses
Intelligent Resolution Profiling to search out the most nonlinear color space areas
and correct those first.

Lightning LUT: Creates a display calibration 3D LUT in five minutes or less. Produces
a very high quality result on professional displays with moderate linearity. Displays
with significant nonlinearity may produce marginal results.
11. Under Video Range, select “SMPTE (16-235)” if you are calibrating a video display that clips
or compresses signals above reference white, as tested on the CalMAN Dynamic Range
page.
12. Click OK.
Upon completion of the AutoCal 3D hardware LUT calibration process, CalMAN automatically loads
the optimized 64x64x64 LUT calibration data into the ColorBox Image Calibration Processor.
DONE – ColorBox 3D LUT calibration and setup is complete.