SpectraCal ColorBox User Manual
Page 5
3528 Bagley Ave. N. Seattle, WA 98103 | 2329 N. Career Ave, Suite 209 Sioux Falls, SD 57107
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
CalMAN 3D LUT Load to ColorBox
CalMAN can load a properly formatted 3D LUT file into the ColorBox. The LUT needs to be a .3dl LUT file
with a bit depth of 10 bits and 64x64x64 data points, with the data points at the following bit levels:
0,16,32,48,64,80,96,112,128,144,160,176,192,208,224,240,256,272,288,304,320,336,352,368,384,400,
416,432,448,464,480,496,512,528,544,560,576,592,608,624,640,656,672,688,704,720,736,752,768,784,
800,816,832,848,864,880,896,912,928,944,960,976,992,1008.
This .3dl LUT file can be a display calibration LUT created with the CalMAN Cube Generator function (as
detailed above). Or, it can be a creative (look) LUT created by any other application (with the proper
data points). During the load process, CalMAN converts the .3dl file into the file format required by the
ColorBox.
To load a 3D LUT file into a ColorBox:
1. In CalMAN, on the Display Control tab, connect to the ColorBox as a Display Control device.
2. On the Display Control tab, click the ‘Open DDC Window’ button.
3. On the DDC Controls dialog, scroll to the ‘3D LUT Controls’ page.
4. Click the ‘Load LUT File’ button.
5. In the resulting file navigation window, select the .3dl LUT file that has been created for the
ColorBox.
Done: The selected 3D LUT file is now contained in the ColorBox.