Spectrum Controls 1756sc-OF8H Series A - Manual (Page 24)

10 ControlLogix ™ Analog HART Modules
Compliance to
European Union
Directives
If this product bears the CE marking, it is approved for installation within
the European Union and EEA regions. It has been designed and tested to
meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
EN 61010-1 and EN 61131-2, EN61000-6-2:2001, EN61000-6-4:2001
EN61010-1:2001
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage,
by applying the safety requirements of EN 61131-2 Programmable
Controllers, Part 2 - Equipment Requirements and Tests.
For specific information required by , EN61131-2:1994 + A11:1996 +
A12:2000, see the appropriate sections in this publication, as well as the
following Allen-Bradley publications:
· Industrial Automation Wiring and Grounding Guidelines For Noise
Immunity, publication 1770-4.1
· Automation Systems Catalog, publication B111
This equipment is classified as open equipment and must be installed
(mounted) in an enclosure during operation as a means of providing
safety protection.
!
CAUTION
POSSIBLE EQUIPMENT OPERATION
ATTENTION: The module is designed to support Removal and Insertion Under
Power (RIUP). However, when you remove or insert an RTB with field-side
power applied, unintended machine motion or loss of process control can occur.
Exercise extreme caution when using this feature.