StorCase Technology InfoStation 10-Bay 1U Ultra320/SATA - Manual (Page 31)

18 RAID Controller Configuration
StorCase Technology, Inc. InfoStation 10-Bay RAID User's Guide - Rev. E00
RAID CONTROLLER CONFIGURATION
NOTES: The configuration and use of the InfoStation RAID Controller requires a certain
level of expertise and experience on the part of the user/integrator. Since there
are many configuration options and variables (i.e.. host platforms, applications,
etc.), only general guidelines will be discussed in this User's Guide.
Also refer to the disk manufacturer's documentation for specific information
regarding the disks.
RAID Management Connection
NOTES: Microsoft ® Windows ® 3.x and Windows ® NT™ 3.5x include a program called
Terminal which does not support ANSI color. If using either O/S, select VT-100
for terminal emulation or use a third-party software program such as Procomm
for Windows.
Microsoft ® Windows ® 95/98/NT/2000 includes a program called HyperTerminal
that supports ANSI color.
Macintosh O/S includes a program called ZTerm for terminal emulation.
The Data Master Storage Manager GUI is included on the StorCase Resource
Kit CD (provided with each InfoStation). The latest version can also be down-
loaded from the StorCase web site at: http://www.storcase.com/support/
datamaster.asp
Refer to the Data Master User's Guide for further information.
Both the Monitor Utility (HyperTerminal) and Data Master GUI are implemented with a VT-100
or ANSI terminal connected through the DB9 port on the rear of the InfoStation chassis (Fi-
gure 8).