StorCase Technology InfoMon - Manual (Page 6)

6 InfoMon Web-based Monitoring Utility
StorCase Technology, Inc. D89-0000-0106 Rev. F01
INSTALLATION
NOTES: To install and operate the InfoMon software, the computer system must meet
certain system requirements (as noted on page 5).
An IP address is required for remote monitoring via the internet. Please contact
your system administrator to set up an IP address for the InfoStation and host
system.
To install the InfoMon Web Monitoring Utility, visit the StorCase Technology web site at:
http://www.storcase.com/infostation/infomon.asp
Windows
For automatic installation:
(For most users)
1. Exit and close ALL programs before installing InfoMon onto the computer system.
2. Click on InfoMon.exe and run the program from its current location. An Installation
Wizard should now take you through the InfoMon installation process.
If the Installation Wizard experiences problems with installing InfoMon onto your computer
system, you will have to manually install InfoMon as directed below.
For manual installation:
1. Create a directory (e.g. c:\InfoMon).
2. Click on InfoMon.zip to start download.
3. Once download is complete, unzip the entire archive into the newly created
directory.
4. Run InfoMon.exe
Oncecomplete, run InfoMon and proceed to section "Starting InfoMon" on page 9.