Starting infomon – StorCase Technology InfoMon User Manual
Page 9
D89-0000-0106 Rev. F01
StorCase Technology, Inc.
InfoMon Web-based Monitoring Utility
9
1
2
3
4
5
7
6
8
1
Allows user to configure the time interval between polls (factory default is 15 sec).
2
Indicates calendar date and time.
NOTE:
Timestamp is also located at the bottom of each InfoMon page.
3
Indicates total count of InfoMon polls.
NOTE:
Total count of polls will reset back to "0" once InfoMon.exe application
is closed.
4
Indicates the model of InfoStation being monitored.
Figure 1: InfoMon.exe Window
Starting InfoMon
Once installation is complete, double-click the InfoMon icon.
The InfoMon.exe window (Figure 1) should appear.
NOTES:
If an error occurs while running InfoMon, check the serial connection between
the host system and the InfoStation. InfoMon will not run if the host system and
InfoStation are not properly connected.
The InfoMon.exe window will only appear on the host system. It cannot be
viewed by remote monitoring via the internet (only the HTML files within the
InfoMon.exe window are viewable via the internet).