Summit Audio EQP-200B Dual Program Equalizer - Manual (Page 2)

Introduction
The Summit Audio EQP-200B Program Equalizer uses tube and solid state technologies
to produce the warm sounds associated with tubes while providing the reliability of solid
state devices. Based on a Pultec type design, the EQP-200B is a very musical sounding
passive equalizer followed by a vacuum tube amplifier to overcome any gain loss.
Connections are made by using three pin XLR connectors.
Features:
• Two independent channels
• Switch selectable frequencies
• Passive I/O circuits
• In/out/shelf switch
• Extended frequencies and LF shelf
• 105 dB dynamic range
• 990 output stage (balanced or unbalanced)
• Three year warranty
• Transformerless signal path
• Hand crafted in the USA
Having found this manual, carefully unpack the EQP-200B and its power cord. Save the
carton and packing material should it be needed for future shipping. Before powering the
unit, read this manual, observing the cautions for high voltage. Proceed by doing the
following:
• Set the line voltage switch to the proper position
• Determine the proper fuse size by referring to the specifications
• Check for pilot lamp illumination when powered up