Summit Audio EQP-200B Dual Program Equalizer - Manual (Page 7)

Note on specifications: Summit Audio is uncompromisingly committed to excellence. All
of our specifications are made with the latest technology and are UNWEIGHTED
measurements. What does this mean? When measurements are “weighted” (e.g. “A”
weighted, dB (B), dB C weighted, etc.), the measurement devices are basically EQed or
filtered before the measurement is taken. This filtering was developed so that sound
pressure level (SPL) measurements can more nearly match human’s non-linear hearing
characteristics. However, when used in noise, frequency response, and distortion
measurements, weighting will alter the results. Completely flat frequency measurements
are key to giving accurate specifications. Summit Audio devices are the highest quality
professional audio gear and the specifications below are made with the flattest possible
unweighted measurements, giving the most accurate results.
OUTPUT: +4 dBu is the designated operating level. The output is balanced or
unbalanced, using discrete 990 operational amplifiers with an impedance of 75
ohms. The recommended load is 600 ohms or more. Maximum output is +25
dBu.
INPUT: The input is electronically balanced with an input impedance of 20K
ohms.
FREQUENCY RESPONSE: 5 Hz to 100 kHz (balanced output)
PANEL SIZE: Standard 19” by 3.5” (two units of rack space).
DEPTH BEHIND PANEL:10.5” in addition to users I/O cabling.
POWER: 35 watts 115-230 Volt 50 or 60 Hz
COMPONENTS: (3) Selected 12AX7A Vacuum tubes, (4) high reliability
discrete 990 operational amplifiers, (10) integrated circuits, (4) transistors
FUSE SIZE: .5 Amp for 115 VAC, .25 Amp for 230 VAC
SHIPPING WEIGHT: 18 lbs. (8.1 kg)