SurgeX SX-AX20 - Manual (Page 17)

SX-AX15 (20) Setup and Control Utility User Manual
Page 16
V. Tabs
(continued)
Users
The Users tab allows for the management of user accounts, including the ability to add, delete,
or edit one of up to 16 users.
User Select: This combo box is used to select
the user to be edited, add a new user, or delete
the currently selected user. To add a user,
select “Add User” in the combo box and a new
user will be added. The default name of this
user is New Usern, where n is the user’s
internal ID number. At this point all of the user’s
settings can be edited. To delete a user, first
select a user using the select user combo box.
This will cause the selected user’s information
to be displayed. Next select Delete User from
the select user combo box and the selected
user will be deleted. To edit an existing user,
simply select that user from the user select
combo box and begin editing.
Name: This field is used to edit the user’s
name. The name can contain any printable
character and may be up to 20 characters in length.
Outlets: This button will display the Select Outlets dialog box. Use this dialog box to
choose the outlets that the selected user is to have rights to.
Groups: This button will display the Select Groups dialog box. Use this dialog box to
choose the groups that the selected user is to have right to.
Role: Use this combo box to select the user role. The user can be either a User or an
Administrator.
Password: Use this field to edit the user’s password. The password can contain any
printable character and may be up to 20 characters in length.
Email Address: Use this field to set the user’s email address. This address can be no
longer than 64 characters. The email address is only used if Send Email has been
checked.
Send Email: Use this check box to enable the sending of email to the selected user
when an outlet (that the user has rights to) has its state change.
DTMF PIN: Use this field to enter the user’s PIN for the DTMF interface. This field is only
available for models with a modem. Only numbers are accepted. The PIN must be 4 to
10 characters in length.