TracRac IM T-Rac Pro Toolbox Mount - Manual (Page 2)

2 T-Rac ToolBox Mount Kit INSTRUCTION MANUAL TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 508-677-4130
Installation Notes:
• This Kit will mount your toolbox to the Compression Mount T-Rac.
• Installation is straight forward, and should take approximately 30 minutes to complete..
1. Verify that you have received the correct parts using the assembly drawing and packing list.
2. Start by removing the two rear clamps on the front rack (the toolbox style rack) See Figure 1.
Tools Required
1) Socket Wrench
2) 9/16” Socket
3) 5/16” Allen Wrench
4) Pencil
5) Measuring Tape
6) Drill & 7/16 Drill Bit
Figure 1. Clamp removal
Estimated assembly 30 minutes
Remove these two clamps