Treasure Garden GP12120 User Manual
Page 7
6
5
Angled Pole
Correct
1
Top Connection
9
16
Hexagon Screw (Long)
16
10
Center Hub
10
9
Corner Joint
6
6
1
Vertical Corner (Upright) Post
2
2
Corner Joint
6
6
7
8
14
7
14
8
18
18
Corner Brace (Left)
Hexagon Wrench (Large)
Corner Brace (Right)
Hexagon Screw (Short)
17
17
Hexagon Screw (Medium)
S T E P 3 Assemble Top Section (Two-person Assembly)
With all corner joints connected to horizontal side beams - attach each #1 angled
pole to top corner joints, push firmly. Bring all beams together at top center (track
side down), slide #9 top connection into each angled pole, bring together with
#10 center hub, then insert #16 hexagon screws and tighten using #14 hexagon
wrench (Large).
S T E P 4 Set Up Roof
Spread the #24 roof loosely over top section.
Note: Do NOT secure roof at this time.
Insert #11 finial into top plate, turn clockwise and hand tighten.
S T E P 5 Attach Top Section to Vertical Corner (Upright) Posts
(Two-person Assembly)
Locate assembled #2 vertical corner (upright) posts (see page
3 for mounting information).
Carefully slide each post into top section #6 corner joint.
Repeat for each corner post.
S T E P 6 Secure Pavilion Posts to Beam
With the top section attached to posts - stand inside Pavilion. Secure each corner
section with #7 corner brace (left) and #8 corner brace (right). Tighten #17 hexagon
screws first, then #18 hexagon screws with #21 hexagon wrench. (See illustration)
Note: #18 screws must be secured into each #5 track adapter.
Finial
11
Roof
24