Tube Tech CL 2A Dual Opto Compressor - Manual (Page 7)

LYDKRAFT ApS
Mose Allé 20, DK 2610 Rødovre
Denmark
7
TECHNICAL SPECIFICATIONS CL 2A:
Input impedance: 5 KOhms
Output impedance: < 60 Ohms
Frequency-response @ -3dB: 5 Hz to 40 kHz
Distortion THD @40 Hz:
0 dBU: < 0,15 %
10 dBU: < 0,15 %
maximum output (1 % THD): +26,0 dBU
maximum input (1 % THD): +21,0 dBU
Noise Rg=200 Ohm:
Output Gain
0 dB +10 dB
Unweighted -80,0 dBU -80,0 dBU
CCIR 468-3 -70,0 dBU -60,0 dBU
Cross talk @ 10KHz < -60dB
CMRR @ 10KHz < -60dB
Gain: off to +10 dB
Compressor
Ratio:
1,5:1 to 10:1
Threshold: off to -20 dBU
Attack: 3mS to 60mS
Release: 0,06 S to 2S
Tracking between interconnected compressors:
(0 to 30 dB compression): < +/- 1 dB
Tubes
ECC 82
2 pcs.
ECC 83 2 pcs.
Dimensions
Height: 2 units
88 mm /
Width:
Depth:
Weight Net: 5,8 Kg / 12,8 lbs
Shipping: 7,1 Kg / 15,6 lbs
Power requirements
@ 115 V / 230 V AC, 50-60 Hz
30-45W
All specifications at RL=600
Lydkraft reserves the right to alter specifications without prior notice
(150130 jgp)